079583083 Petcock, left side, Orlandi type for Ducati bevels 750SS 900SS GT M12 x 1.50
Ducati 350-500 Twin GTV
Ducati 350-500 Twin Sport
Ducati 500 Sport Desmo
Ducati 750 GT/Sport bevel
Ducati 750/900 SS bevel
Ducati 860/900 GTS
Ducati 750 GT 1971 - 1979
Ducati 750 S 1972 - 1974
Ducati 750 SS 1972 - 1974
Ducati 750 SS 1973 - 1974
Ducati 860
Ducati 860 1976 -
Ducati 900 MHR bevel 1983 - 1985
Ducati 900 S 2 bevel 1979 - 1984
Ducati 900 SS bevel 1975 - 1980
Ducati 900 SS bevel 1978 - 1980
Ducati 900 SS bevel 1981 - 1982
Aftermarket fuel valve replaces discontinued Orlandi brand.
Note: Due to the variety of fuel additives on the market, different environmental conditions, and multiple fuel additives being used today, we no longer offer free warranty replacements on these valves. We suggest you avoid ethanol and all other supplemental fuel additives including stabilizers. If you don't ride the bike, drain the tank.
Note 2: Installation tip: Some people have reported that the internal gasket has turned with the handle when these petcocks are new - in order to prevent that, we suggest spraying a lubricant into the valve and working the valve back and forth to loosen them up prior to installation.
Note 3: Do not over-tighten the valve to the fuel tank. In addition to potentially damaging your valuable antique fuel tank, you also run the risk of snapping the valve off at the threads. We recommend use of our petcock indexing washers to align the valve without the need to over-tighten and sqeeze the gaskets more than required to seal against leakage.
079583083 Petcock, left side, Orlandi type for Ducati bevels 750SS 900SS GT M12 x 1.50Ducati 350-500 Twin GTVDucati 350-500 Twin SportDucati 500 Sport DesmoDucati 750 GT/Sport bevelDucati 750/900 SS bevelDucati 860/900 GTSDucati 750 GT 1971 - 1979Ducati 750 S 1972 - 1974Ducati 750 SS 1972 - 1974Ducati 750 SS 1973 - 1974Ducati 860 Ducati 860 1976 -Ducati 900 MHR bevel 1983 - 1985Ducati 900 S 2 bevel 1979 - 1984Ducati 900 SS bevel 1975 - 1980Ducati 900 SS bevel 1978 - 1980Ducati 900 SS bevel 1981 - 1982 Aftermarket fuel valve replaces discontinued Orlandi brand.Note: Due to the variety of fuel additives on the market, different environmental conditions, and multiple fuel additives being used today, we no longer offer free warranty replacements on these valves. We suggest you avoid ethanol and all other supplemental fuel additives including stabilizers. If you don't ride the bike, drain the tank. Note 2: Installation tip: Some people have reported that the internal gasket has turned with the handle when these petcocks are new - in order to prevent that, we suggest spraying a lubricant into the valve and working the valve back and forth to loosen them up prior to installation. Note 3: Do not over-tighten the valve to the fuel tank. In addition to potentially damaging your valuable antique fuel tank, you also run the risk of snapping the valve off at the threads. We recommend use of our petcock indexing washers to align the valve without the need to over-tighten and sqeeze the gaskets more than required to seal against leakage.
