carburetor

Motion Pro Premium fuel line and vent hose, 3/16", 3 feet, clear This vent hose fits perfectly on the larger ~5.4mm brass vent tube as found on... more info

Motion Pro Premium fuel line and vent hose, 1/8", 3 feet This vent hose fits perfectly on the small ~4mm brass vent tube as found on Dellorto PHF 30... more info

Dellorto number 10238-34 bowl nut, PHM & late PHF carbs, using a 20mm sealing washer These items are rarely requested and as such are available... more info

GU12937200, 12937200  Cable adjuster for top of VHB and VHBZ square slide, flat top PHF and PHBH round slide carbs. Original Moto Guzzi part... more info

Dellorto mixture screw fitting PHF 30, 32, 34, 36 and PHM 38, 40 and 41 carbs. Original to California 1100 carb, 1100 Sport carb, big valve... more info

Dellorto number 11773  needle clip or plate for PHM 38, 40 and 41carbs  more info

New version genuine Dellorto 60/3 slide for PHM38 and PHM40 carburetors. Note: See the "old slide" vs "new slide" comparison photos. On all new... more info

Dellorto 5011 wave washer for carb cover screw on many versions of Dellorto carburetors. Used on VHB, VHBZ, VHBT, PHBH, PHBL, PHF, PHM carbs on all... more info

Float bowl oring for Dellorto VHB PHF PHBH VHBZ and PHM carburetors.   Tip : to successfully install these orings, it is necessary to work your... more info

Dellorto float needle for VHB carburetors, viton rubber tip. This is one of the common faulty pieces that cause your carburetors to dribble fuel on... more info

Choke pickup jet oring for VHB29, VHB30, VHBZ, PHBH, PHF30, PHF36 or PHM40 carbs as used on Guzzis from 1969 to 1995. This fat little o-ring... more info

Dellorto mixture screw VHB29, VHB30, VHBZ, PHBH, PHF30, and PHF36 carbs on Guzzis. The metering tip on these mixture screws is ~2.25mm long. Overall... more info

Dellorto 7673 idle adjusting screw used on VHB29, VHB30, VHBZ, PHF30, PHF36, PHM and PHBH carburetors found on Guzzis.  This is the knurled... more info

0615271476  These little rubber cable boots are used to seal choke cables and throttle cables whenever they enter a carburetor.  Used on... more info

V5 taper slide needle for Dellorto VHB carburetors. Generally found on early Ambassador and V750 Special models, and V700 models outside the US... more info

Dellorto choke valve, or choke plunger used on cable operated enricheners on the VHB29, VHB30, VHBZ, PHF30, PHF36, PHBH and PHM carbs used by Guzzi.... more info

This is the plastic insulating sleeve between the carburetor and the intake manifold as found on VHB29C carburetors.  Dimensions:  ~40.12mm... more info

Flip top choke for PHM38, PHM40 AND PHM41 carbs as used on Guzzi, Ducati, Laverda. Choke lever assembly threads directly into carburetor body. By... more info

Number 42 Dellorto 1486 series 5mm diameter pilot jet VHB, PHF, PHM carbs on Guzzi, Ducati, Laverda and other brand bikes. 1486-042 more info

Number 45 Dellorto 1486 series 5mm diameter pilot jet VHB, PHF, PHM carbs on guzzi, Ducati, Laverda and other brand bikes. 17935750 1486-045 more info

Number 47 Dellorto 1486 series 5mm diameter pilot jet VHB, PHF, PHM carbs used on Guzzi, ducati, Laverda and other brand bikes. 1486-047 more info

Number 48 Dellorto 1486 series 5mm diameter pilot jet VHB, PHF, PHM carbs used on Guzzi, Ducati, Laverda and other brand bikes. 1486-048 more info

Number 50 Dellorto 1486 series 5mm diameter pilot jet VHB, PHF, PHM carbs used on Guzzi, Ducati, Laverda and other brand bikes. 14860-050 more info

Number 52 Dellorto 1486 series 5mm diameter pilot jet VHB, PHF, PHM carbs used on Guzzi, Ducati, Laverda and other brand bikes. 1486-052 more info

Number 54 Dellorto 1486 series 5mm diameter pilot jet VHB, PHF, PHM carbs used on Guzzi, Ducati, Laverda and other brand bikes. 1486-054 more info

Number 55 Dellorto 1486 series 5mm diameter pilot jet VHB, PHF, PHM carbs used on Guzzi, Ducati, Laverda and other brand bikes. 1486-055 more info

Number 57 Dellorto 1486 series 5mm diameter pilot jet VHB, PHF, PHM carbs used on Guzzi, Ducati, Laverda and other brand bikes. 1486-057 more info

Number 58 Dellorto 1486 series 5mm diameter pilot jet VHB, PHF, PHM carbs used on Guzzi, Ducati, Laverda and other brand bikes. 1486-058 more info

Number 60 Dellorto 1486 series 5mm diameter pilot jet VHB, PHF, PHM carbs used on Guzzi, Ducati, Laverda and other brand bikes. 1486-060 more info

Number 62 Dellorto 1486 series 5mm diameter pilot jet VHB, PHF, PHM carbs used on Guzzi, Ducati, Laverda and other brand bikes. 1486-062 more info

Number 64 Dellorto 1486 series 5mm diameter pilot jet VHB, PHF, PHM carbs used on Guzzi, Ducati, Laverda and other brand bikes. 1486-064 more info

Number 65 Dellorto 1486 series 5mm diameter pilot jet VHB, PHF, PHM carbs used on Guzzi, Ducati, Laverda and other brand bikes. 1486-065 more info

Number 67 Dellorto 1486 series 5mm diameter pilot jet VHB, PHF, PHM carbs used on Guzzi, Ducati, Laverda and other brand bikes. 1486-067 more info

Dellorto pilot jet 68. Note: Dellorto pilot jets are also used for the main jet function on VHB carburetors. more info

Dellorto pilot jet 70. Note: Dellorto pilot jets are also used for the main jet function on VHB carburetors. more info

Number 120 Dellorto 1486 series 5mm jet, used as a main jet on  square slide VHB carburetors, standard on most US version big twin Guzzis from... more info

Number 125 Dellorto 1486 series 5mm  jet,  used as a main jet on square slide VHB carburetors, standard on most US version big twin Guzzis... more info

Number 128 Dellorto 1486 series 5mm  jet,  used as a main jet on square slide VHB carburetors, standard on most US version big twin Guzzis... more info

Number 130 Dellorto 1486 series 5mm  jet, used as a main jet on square slide VHB carburetors, standard on most US version big twin Guzzis... more info

Number 135 Dellorto 1486 series 5mm jet, used as a main jet on square slide VHB carburetors, standard on most US version big twin Guzzis from... more info

Number 138 Dellorto 1486 series 5mm "pilot" jet, used as a main jet on VHB carburetors, standard on most US version big twin Guzzis from around... more info

Number 140 Dellorto 1486 series 5mm "pilot" jet, used as a main jet on VHB carburetors, standard on most US version big twin Guzzis from around... more info

Number 142 Dellorto 1486 series 5mm "pilot" jet, used as a main jet on VHB carburetors, standard on most US version big twin Guzzis from around... more info

Number 145 Dellorto 1486 series 5mm "pilot" jet, used as a main jet on VHB carburetors, standard on most US version big twin Guzzis from around... more info

Number 148 Dellorto 1486 series 5mm "pilot" jet, used as a main jet on VHB carburetors, standard on most US version big twin Guzzis from around... more info

Number 150 Dellorto 1486 series 5mm "pilot" jet, used as a main jet on VHB carburetors, standard on most US version big twin Guzzis from around... more info

Number 152 Dellorto 1486 series 5mm "pilot" jet, used as a main jet on VHB carburetors, standard on most US version big twin Guzzis from around... more info

Number 155 Dellorto 1486 series 5mm "pilot" jet, used as a main jet on VHB carburetors, standard on most US version big twin Guzzis from around... more info

Number 160 Dellorto 1486 series 5mm "pilot" jet, used as a main jet on VHB carburetors, standard on most US version big twin Guzzis from around... more info

Number 165 Dellorto 1486 series 5mm "pilot" jet, used as a main jet on VHB carburetors, standard on most US version big twin Guzzis from around... more info

This is the Dellorto float bowl nut as used on the early PHF36mm carburetors as used on 1976-1984: 850 LeMans, LeMans II, and LeMans III.... more info

GU14936950 Spring for accelerator pump on PHF and PHM series carburetors. This is a very light and rather delicate little spring that returns the... more info

V9 taper slide needle for Dellorto VHB carburetors. This is considered to be the stock slide needle for late Ambassador, Eldorado, 850GT, V7 Sport,... more info

Flip top choke assembly for most VHB 27, 29, 30, VHBT and PHF30 through PHF36 carbs. By installing these carburetor mounted flip open choke levers... more info

Replacement choke lever for various Dellorto choke assemblies.  CNC milled aluminum choke lever accepts the original roll pin and is beveled to... more info

Clamp securing carburetor to the intake manifold on Guzzis using VHB carbs. Ambassador, 1969-1971 V750 Special, Eldorado, 850GT, V7 Sport, 850 T, T3,... more info

Genuine Dellorto 52514-77 carb kit for PHF 30, 32, 34 and 36 carburetors with external linkage assemblies (crank tops, bell cranks) as used on 850... more info

Dellorto choke valve assembly for cable operated enrichener circuits used on most VHB and all PHF carbs. Includes choke valve or plunger, choke valve... more info

Accelerator pump spring for Dellorto VHB 29 and VHB 30 carburetors from 1968-1979. Ambassador, 1969-1971 V750 Special, Eldorado, 850GT, V7 Sport,... more info

GU19934380 Dellorto 9010-02 float for PHBH carbs as used on Guzzi small twin V50 III, Monza, V65C, V65SP, V65TT, Lario. 6.5g, Dellorto number 9010.2... more info

GU19939980 Genuine Dellorto carburetor kit for PHBH carbs: V50 III, Monza, V65C, V65SP, V65TT, Lario, Nevada 750. Dellorto number 52523-77 kit,... more info

Due to limited demand, this item is not normally stocked, and is available by special order only. We will order this item from the... more info

GU28112610 Dellorto carburetor PHF30DD right Euro spec as used on California II, SP II, 850 T5 This carburetor comes set up like the european version... more info

GU28112611 Dellorto carburetor PHF30DD left Euro spec as used on California II, SP II, 850 T5 This carburetor comes set up like the european... more info

Genuine Dellorto carburetor gasket and oring kit for (late version) round slide PHF 30 D and PHF 36 D carburetors, as fitted to Moto Guzzis when not... more info

GU37939905  075527426   Genuine Dellorto 52560-77 carburetor gasket and oring kit for Dellorto PHM 38, 40 and 41mm carburetors as found on... more info

Dellorto PHM40AS1 carburetor Ducati with float tickle enrichener.  Replaces Ducati 076592704 on 1970s bevel Ducati 750/900 SS.   Left hand... more info

Dellorto PHM40AS1 carburetor Ducati with float tickle enrichener.  Replaces Ducati 076592700 on 1970s bevel Ducati 750/900 SS.  Right hand... more info

Dellorto PHF36 carburator as fitted to euro SP3, right side. This carburetor comes equipped with 130 main jet, 50 pilot jet, K18 needle, AB268... more info

Dellorto PHF36 carburator as fitted to euro SP3, left side. This carburetor comes equipped with 130 main jet, 50 pilot jet, K18 needle, AB268... more info

Dellorto PHM40NS1 carburetor left 1100  Sport euro jetted. As original 1100 Sport in Europe. 37112606 The PHM40 carbs come with: 152 main jet 57... more info

Dellorto PHM40NS1 carburetor right 1100Sport euro jetted. As original 1100 Sport in Europe. 37112605 The PHM40 carbs come with: 152 main jet 57 pilot... more info

GU39937600 This is the spring that holds the choke valve plunger in the closed position on VHB , PHBH, and PHM carbuators with a cable operated choke... more info

Dellorto 4057 fiber float bowl nut gasket for VHB and early PHF carbs. Guzzi number 13933900, seals bowl nut to the float bowl. ~18 mm ID x 23mm OD.... more info

GU43934000  Dellorto fuel inlet screen filter, white plastic for Dellorto VHB, PHF, PHBH, PHM and VHBZ carburetors as used by Guzzi, Ducati,... more info

Moto Guzzi part numbers 10934900, 13934900. Current production fuel inlet banjo bolt for VHB, PHF, PHM and most PHBH Dellorto carburetors. 6mm... more info

Dellorto part number 4670 spring for idle speed screw adjuster Guzzi number 13936700. Used on VHB, VHBZ, PHBH, PHF, PHM carburators.Fits all Guzzi... more info

Cable adjuster lock nut for VHB, VHBZ, flat top PHF and PHBH carburetor throttle and choke cable adjusters. This nut has a ~6mm internal diameter.... more info

GU17939950 Ambassador, 1969-1971 V750 Special, Eldorado, 850GT, V7 Sport, 850T, 850T3, Convert, G5, SP 1000, CX 100. Also works for VHBZ carbs as... more info

Genuine Dellorto 52547-77 carburetor gasket and oring kit for round slide PHF30 and 36 carburetors, as fitted to Moto Guzzis, when not equipped with... more info

Genuine Dellorto manifold clamp kit with minimum clamping diameter ~53mm, relaxed maximum open position ~54.5mm. Ducati 075527527 for PHM carburetors... more info

Carburetor spare part kit including: spring, cap, pump jet membrane, gaskets, valves, and screws . NOTE: This item is available by special order.... more info

Dellorto 90 degree cable elbow for the top of PHF and PHM carburetors.  This kit includes the elbow (M6), the adjuster screw, the lock nut, and... more info

Dellorto number 1481 cable adjuster screw for thottle cable guide elbows used on flat top PHF and PHM series carburetors. This adjusting screw has a... more info

Needle retaining clip for Dellorto VHB, VHBZ, VHBT, SS1, UA and UB carburetors, secures needle in selected position, easy in and out for needle... more info

Dellorto 6413 6mm main jet 115 for round slide PHF, PHM and PHBH carburetors as used on Guzzis and many other brand motorcycle applications including... more info

Dellorto 6413 6mm main jet 118 for round slide PHF, PHM and PHBH carburetors as used on Guzzis and many other brand motorcycle applications including... more info

Dellorto 6413 6mm main jet 120 for round slide PHF, PHM and PHBH carburetors as used on Guzzis and many other brand motorcycle applications including... more info

Dellorto 6413 6mm main jet 122 for round slide PHF, PHM and PHBH carburetors as used on Guzzis and many other brand motorcycle applications including... more info

Dellorto 6413 6mm main jet 125 for round slide PHF, PHM and PHBH carburetors as used on Guzzis and many other brand motorcycle applications including... more info

Dellorto 6413 6mm main jet 127 for round slide PHF, PHM and PHBH carburetors as used on Guzzis and many other brand motorcycle applications including... more info

Dellorto 6413 6mm main jet 128 for round slide PHF, PHM and PHBH carburetors as used on Guzzis and many other brand motorcycle applications including... more info

Dellorto 6413 6mm main jet 130 for round slide PHF, PHM and PHBH carburetors as used on Guzzis and many other brand motorcycle applications including... more info

Dellorto 6413 6mm main jet 132 for round slide PHF, PHM and PHBH carburetors as used on Guzzis and many other brand motorcycle applications including... more info

Dellorto 6413 6mm main jet 135 for round slide PHF, PHM and PHBH carburetors as used on Guzzis and many other brand motorcycle applications including... more info

Dellorto 6413 6mm main jet 138 for round slide PHF, PHM and PHBH carburetors as used on Guzzis and many other brand motorcycle applications including... more info

Dellorto 6413 6mm main jet 140 for round slide PHF, PHM and PHBH carburetors as used on Guzzis and many other brand motorcycle applications including... more info

Dellorto 6413 6mm main jet 142 for round slide PHF, PHM and PHBH carburetors as used on Guzzis and many other brand motorcycle applications including... more info

Dellorto 6413 6mm main jet 145 for round slide PHF, PHM and PHBH carburetors as used on Guzzis and many other brand motorcycle applications including... more info

Dellorto 6413 6mm main jet 148 for round slide PHF, PHM and PHBH carburetors as used on Guzzis and many other brand motorcycle applications including... more info